Friday 3 June 2011

Archery - Types of Fletching

Fletching is traditionally made from bird feathers, usually Turkey. Also solid plastic vanes and thin sheetlike spin vanes are used. They are attached near the nock (rear) end of the arrow with thin double sided tape, glue, or, traditionally, sinew. Three fletches is the most common configuration in all cultures, though as many as six have been used. Two will result in unstable arrow flight.


When three-fletched the fletches are equally spaced around the shaft with one placed such that it is perpendicular to the bow when nocked on the string (though with modern equipment, variations are seen especially when using the modern spin vanes). This fletch is called the "index fletch" or "cock feather" (also known as "the odd vane out" or "the nocking vane") and the others are sometimes called the "hen feathers". Commonly, the cock feather is of a different color. Traditionally, the hens are solid and the cock is barred. However, if archers are using fletching made of feather or similar material, they may use same color vanes, as different dyes can give varying stiffness to vanes, resulting in less precision. When four-fletched, often two opposing fletches are cock feathers and occasionally the fletches are not evenly spaced.

The fletching may be either parabolic (short feathers in a smooth parabolic curve) or shield (generally shaped like half of a narrow shield) cut and is often attached at an angle, known as helical fletching, to introduce a stabilizing spin to the arrow while in flight. Whether helicial or straight fletched, when natural fletching (bird feathers) are used it is critical that all feathers come from the same side of the bird.

Oversized fletchings can be used to accentuate drag and thus limit the range of the arrow significantly; these arrows are called flu-flus. Misplacement of fletchings can often change the arrow's flight path dramatically.

No comments:

Post a Comment